The NanoBeast is our most compact brushless motor, delivering impressive power despite its size. Measuring only 14.6mm in diameter and 20.5mm in length, it’s designed to fit into the tightest spaces. Its dimensions have been precisely optimized to provide maximum power, speed, and smooth throttle control within the smallest possible form factor. With our LCG mount, you can often fit extras such as interiors in a small body. Or, using our Forward Facing Mount, pioneered by Mofo RC, you can put the weight up front on the vehicle. This motor is also offered in various combos with the motor mount and an optional Mofo RC Rockwolf ESC.

Please note that on a stock SCX30 chassis with the stock receiver combo, the esc/receiver combo does not have a throttle port. You must use an aftermarket receiver and ESC setup.  Use at your own discretion.

Click here for the Forward facing mount

Click here for the LCG Mount

Select motor only or with steel gear installed Please read up on the difference of the Mod.3 vs Mod.5 pitch. Mod.3 is the standard pitch for the scx24 transmissions

Mod.3 11T pinion gear - standard (SCX30 Direct Fit)

Mod.3 14T pinion gear - slight speed boost

Mod.4 8t Pinion Gear- Standard

Mod.4 12t Pinion Gear- Slight Speed Boost (For Experimental Mount)

Mod.5 8T pinion gear - standard

Mod.5 11T pinion gear -  slight speed boost will not fit in our 9mm mount

Specs and Dimensions

KV	3200
Voltage	2-3s Lipo
Bolt Pattern	9mm
Poles	12 Pole, 9 Slot
Stator Diameter/Length	11mm x 11mm
Shaft Diameter	1.5mm (Accepts Press-Fit Pinions Only)
Case Diameter/Length	14.6mm x 20.5mm
Weight	13 grams
Wire Length	160mm
Connector	Standard PH2.0 3 pin