The NanoBam XL is a slightly longer motor with a larger 12mm bolt pattern motor compared to our standard NanoBam line. It is intended for heavier vehicles such as the Redcat Ascent-18 series as a replacement for the 130 or 180 sized brushed motors.

Please note that if you have the newest brushed/brushless model, this motor will not work as the motor mount has been updated to a 12.5mm pattern vs an industry standard 12mm. The pinion also has been updated to a Mod.4 11t. Please double check your motor before purchasing.

The 1900KV motor is designed primarily for crawling, while the 3200KV offers significantly higher speed without sacrificing much crawling capability. Both motors fit directly onto the Ascent-18 with no modifications needed.

• Includes pre-installed Mod.4 12t pinion gear.

Notes

• The motor can must be able to spin freely. If there is for some reason anything touching, you must sand or fix the clearance issue before running. This should not be required for the Redcat.
• The Rockwolf esc we have includes a PH2.0 connector. You may need a JST to PH2 adapter.

Specs and Dimensions

KV	1900/3200
Voltage	2-3s Lipo
Bolt Pattern	12mm
Poles	12 Pole, 9 Slot
Stator Diameter/Length	12mm x 11mm
Shaft Diameter	1.5mm (Accepts Press-Fit Pinions Only)
Case Diameter/Length	16.3mm x 23mm
Weight	16.8 grams
Wire Length	125mm
Connector	Standard PH2.0 3 pin