Mofo RC | SMP 1700Kv Brushless Pancake Motor & Reaper ESC + Mount Combos- (For Axial® SCX24™/AX24™)
The SMP Motor from Mofo RC features a 1700 Kv rating and supports 2s, 3s, and even 4s power configurations. Renowned for its exceptional smoothness and precision, it delivers substantial torque and refined low-speed control, particularly when paired with the Reaper ESC. The aluminum mount is designed for 12mm bolt pattern motors and accommodates gears up to 24T mod.3 or 14T mod.5. Its three-hole mounting pattern ensures enhanced structural integrity and efficient heat dissipation for optimal performance.
Includes
- Mofo RC | SMP Motor with/without pinion of choice
- Mofo RC | 12mm Aluminum Forward Facing Motor Mount
- Mofo RC | Pre-programmed Reaper 30A ESCape 32 ESC
- Note: The ESC has our default settings for this motor, but you may want to change them depending on your setup.
- Note: The ESC has our default settings for this motor, but you may want to change them depending on your setup.
Gear Options
- Mod.3
- 18t Pinion Gear- Standard - Most Popular
- 20t Pinion Gear- Slight Speed Boost
- Mod.5
- 11t Pinion Gear- Standard - Larger teeth, less common
- 13t Pinion Gear- Slight Speed Boost
Specs and Dimensions
| KV | 1700 |
| Voltage | 2-4s Lipo |
| Poles | 14 Pole, 12 Slot |
| Stator Diameter/Length | 20mm x 4mm |
| Shaft Diameter | 3mm w/Flat Spot (Accepts Press-Fit or Set-Screw Pinions) |
| Case Diameter/Length | 25.6mm x 13.4mm |
| Weight | 18 grams |
| Wire Length | 160mm |
| Connector | Standard PH2.0 3 pin |
The SMP Motor from Mofo RC features a 1700 Kv rating and supports 2s, 3s, and even 4s power configurations. Renowned for its exceptional smoothness and precision, it delivers substantial torque and refined low-speed control, particularly when paired with the Reaper ESC. The aluminum mount is designed for 12mm bolt pattern motors and accommodates gears up to 24T mod.3 or 14T mod.5. Its three-hole mounting pattern ensures enhanced structural integrity and efficient heat dissipation for optimal performance.
Includes
- Mofo RC | SMP Motor with/without pinion of choice
- Mofo RC | 12mm Aluminum Forward Facing Motor Mount
- Mofo RC | Pre-programmed Reaper 30A ESCape 32 ESC
- Note: The ESC has our default settings for this motor, but you may want to change them depending on your setup.
- Note: The ESC has our default settings for this motor, but you may want to change them depending on your setup.
Gear Options
- Mod.3
- 18t Pinion Gear- Standard - Most Popular
- 20t Pinion Gear- Slight Speed Boost
- Mod.5
- 11t Pinion Gear- Standard - Larger teeth, less common
- 13t Pinion Gear- Slight Speed Boost
Specs and Dimensions
| KV | 1700 |
| Voltage | 2-4s Lipo |
| Poles | 14 Pole, 12 Slot |
| Stator Diameter/Length | 20mm x 4mm |
| Shaft Diameter | 3mm w/Flat Spot (Accepts Press-Fit or Set-Screw Pinions) |
| Case Diameter/Length | 25.6mm x 13.4mm |
| Weight | 18 grams |
| Wire Length | 160mm |
| Connector | Standard PH2.0 3 pin |
Original: $114.99
-65%$114.99
$40.25Description
The SMP Motor from Mofo RC features a 1700 Kv rating and supports 2s, 3s, and even 4s power configurations. Renowned for its exceptional smoothness and precision, it delivers substantial torque and refined low-speed control, particularly when paired with the Reaper ESC. The aluminum mount is designed for 12mm bolt pattern motors and accommodates gears up to 24T mod.3 or 14T mod.5. Its three-hole mounting pattern ensures enhanced structural integrity and efficient heat dissipation for optimal performance.
Includes
- Mofo RC | SMP Motor with/without pinion of choice
- Mofo RC | 12mm Aluminum Forward Facing Motor Mount
- Mofo RC | Pre-programmed Reaper 30A ESCape 32 ESC
- Note: The ESC has our default settings for this motor, but you may want to change them depending on your setup.
- Note: The ESC has our default settings for this motor, but you may want to change them depending on your setup.
Gear Options
- Mod.3
- 18t Pinion Gear- Standard - Most Popular
- 20t Pinion Gear- Slight Speed Boost
- Mod.5
- 11t Pinion Gear- Standard - Larger teeth, less common
- 13t Pinion Gear- Slight Speed Boost
Specs and Dimensions
| KV | 1700 |
| Voltage | 2-4s Lipo |
| Poles | 14 Pole, 12 Slot |
| Stator Diameter/Length | 20mm x 4mm |
| Shaft Diameter | 3mm w/Flat Spot (Accepts Press-Fit or Set-Screw Pinions) |
| Case Diameter/Length | 25.6mm x 13.4mm |
| Weight | 18 grams |
| Wire Length | 160mm |
| Connector | Standard PH2.0 3 pin |
